Christie LX505 Guide De Référence Rapide page 12

Side Control and Indicators
①
②
③
④
⑤
① ON/STAND-BY button
Turn the projector on or off.
② MENU button
Open or close the On-Screen Menu.
③ SELECT button
– Execute the selected item.
– Zoom in and out the image in the Digital
zoom mode.
④ Point ▲▼◄► ( VOLUME – / + ) buttons
– Select an item or adjust the value in the
On-Screen Menu.
– Pan the image in Digital zoom + mode.
– Adjust the volume level (with Point ◄►
buttons).
⑤ SHUTTER button
Close and open up the built-in shutter.
⑥ LENS button
Enter the focus, zoom, and lens shift
adjustment mode.
⑦ INPUT button
Select an input source.
LX505/605
⑦
⑥
⑧ POWER indicator
– Light green while the projector is in stand-
by mode.
– Light green during operations.
– Blink green in the Power management
mode.
⑨ LAMP indicator
Light red during operations.
⑩ WARNING TEMP. indicator
Blink red when the internal temperature of
the projector exceeds the operating range.
⑪ WARNING FILTER indicator
– Blink slow when the filter is being scrolled.
– Blink fast when the filter scroll is not
working properly or the filter cartridge is not
installed.
– Light orange when the clogging of the filter
is detected or the filter counter reaches
a time set in the timer setting, urging
immediate filter/ filter cartridge replacement.
⑫ SHUTTER indicator
Light blue when the shutter is closed.
⑬ LAMP REPLACE indicator
Light orange when the projection lamp
reaches its end of life.
Setup Guide
10
020-000540-01 Rev. 1 (11-2010)
⑧
⑨
⑩
⑪
⑫
⑬