Makita PM7650H Manuel D'utilisation Et De Sécurité page 22

1) Draining the solution tank
To clean the solution tank (1), remove the shoulder strap (2) from the hook (3) by
pressing the bottom of the buckle to open it and then taking it off.
Clean the tank inside with water.
And then remove the draining cap (4) to drain the waste water after cleaning.
(1)
CAUTION:
• After draining, be sure to attach the strap to the hook.
(3)
(2)
(4)
2) Cleaning the strainer at the top of solution tank
Remove the tank cap, take out the strainer from inside the tank and then clean it
after use.
3) Cleaning the strainer at the solution tank-tube joint
Loosen and remove the cap which comes out with the strainer (5).
Clear dust and particles with water away from the strainer.
(5)
4) Retaining the straight pipe with a supplied hand strap
When storing the mist blower, retain the straight pipe with a supplied hand strap tied
to the frame.
Retaining the pipe in this position will be easy to transport the unit.
22