Télécharger Imprimer la page

Grizzly Tools ERM 1434-3 Stow Traduction De La Notice D'utilisation Originale page 65

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 31
Oil the wheels from time to time.
Before each use, check the lawnmow-
er for obvious defects such as loose,
worn or damaged parts. Check that
all nuts, bolts and screws are sitting
firmly.
Check the covers and protective de-
vices for damage and check that they
are sitting correctly. Replace them if
necessary.
Changing the Blade
If the blade is blunt, it can be sharpened
by a specialist workshop. If the blade
is damaged or showing signs of imbal-
ance, it must be replaced (see chapter on
"Spare Parts/Accessories").
1. Turn the equipment over.
2. Use sturdy gloves and hold
the blade firmly (25). Turn the
blade screw (26) anticlockwise
off of the motor spindle using a
screwdriver.
3. Install the new blade in the
reverse order. Ensure that the
blade is positioned correctly and
the screw tightened firmly.
Storage
The device features the following storage
options to save space:
1. Release the upper and lower
quick-release levers (3+6).
2. Fold out the bow-type handle
(1) and the lower bar (4) over
the device housing (10).
Make sure that the cables do
not become trapped.
3. You can also place the device
upright in the stow position with
the bow-type handle (1) folded
either in or out.
Keep the equipment dry and out of
reach of children.
Allow the motor to cool before storing
the equipment in a confined space.
Do not cover the equipment with nylon
bags as moisture could build up.
We will not be liable for damages caused
by our equipment where these are caused
by improper repair or the use of non-
original parts or by use other than for the
intended purpose.
Waste disposal and
environmental protection
Do not dispose of used oil in the sewage
system or drains. Dispose of used oil in
an environmentally correct manner - bring
it to a waste disposal center.
Be environmentally friendly. Return the
tool, accessories and packaging to a recy-
cling
centre when you have finished with
them.
Machines do not belong with do-
mestic waste.
The plastic and metal parts employed
can be separated out and thus recy-
cled use can be implemented. Ask our
Service-Center for details.
Throw the cut grass on the compost.
Do not throw it in the normal house-
hold waste.
Defective units returned to us will be
disposed of for free.
GB
65

Publicité

loading