LAS PREMIUM Manuel page 12

Turn the lamps to the front by pushing them downward then lifting them upwards on the
other side positioning them. See photo. All what needs to be done now is to snap in the
molding by pulling the lamp forward. See photo. The 13-pole plug of the lighting unit can
now be plugged into the connection socket. The lighting cable is fastened below the
rack table using the cable ties supplied.
Mounting the bicycles onto the bicycle rack
The first bicycle is placed into the front bicycle rail (next to the vehicle) and fastened on
the U-bracket using the small frame holder. Open the frame holder clamp by slackening
the lockable nut. Now fasten this clamp on the bicycle frame and relock the frame
holder. The second bicycle is normally placed into the second bicycle rail in opposite
direction to be fastened using the long frame holder like the first one. It may be
necessary, differently as described, to displace the bicycles individually on the rear rack
so that the frame holders can be correctly fastened.
The bicycle rails can be horizontally adjusted. To do this, you need to slacken the M6
plastic nuts below the bicycle rail. The wheels of the bicycles are located using the
to the wheel stoppers).
wheel stoppers and secured with the tension straps (mounted
The bicycle front wheel is additionally secured using the small lashing strap.
12