Hilti AI S1/4 Mode D'emploi Original page 20

HF output power
Protocol
4.3 Power source
Li-ion battery for the scanner
Li-ion battery for the grip unit
Charging adapter power supply
Charging adapter output voltage
Charging current
4.4 Types of connection
Wi-Fi
Bluetooth
GSM/GPRS/EDGE mobile communication
UMTS/HSPA+ mobile communication
4.5 Ambient conditions
Operating temperature
Storage temperature
Temperature during charging
Recommended battery storage temperature
5 Before use
5.1 Assembly
5.1.1 Inserting the battery
1. Open the battery release catch.
2. Insert the battery.
3. Close the battery release catch.
5.1.2 Assembling the screen unit and grip unit
1. Press the release button before engaging the grip unit with the screen unit.
2. While keeping the release button pressed, allow the grip unit to engage with the screen unit.
3. Pull the hand strap through the eye.
4. Remove the protective foil.
5.1.3 Inserting the SIM card in the screen unit
Note
It is necessary to insert a SIM card only if the scanner is going to be used in a mobile network.
1. Remove the grip unit.
14
3
4
5
Up to 33 dBm (ERP)
EPC Class 1 Gen 2, ISO/IEC 18000-6C
3.7 V/2.26 Ah
3.7 V/4.40 Ah
100...240 V/50...60 Hz
5 V
2 A
802.11a/b/g/n
V2.1 EDR
• 850 MHz
• 900 MHz
• 1,800 MHz
• 1,900 MHz
• 850 MHz
• 900 MHz
• 1,900 MHz
• 2,100 MHz
0 ℃ ... 45 ℃
(32 ℉ ... 113 ℉)
−25 ℃ ... 60 ℃
(−13 ℉ ... 140 ℉)
0 ℃ ... 45 ℃
(32 ℉ ... 113 ℉)
−20 ℃ ... 20 ℃
(−4 ℉ ... 68 ℉)