Hilti AI S1/4 Mode D'emploi Original page 16

1 Information about the documentation
1.1 Explanation of signs used
1.1.1 Warnings
Warnings alert persons to hazards that occur when handling or using the product. The following signal words
are used in combination with a symbol:
DANGER! Draws attention to imminent danger that will lead to serious personal injury or fatality.
WARNING! Draws attention to a potentially dangerous situation that could lead to serious per-
sonal injury or fatality.
CAUTION! Draws attention to a potentially dangerous situation that could lead to slight personal
injury or damage to the equipment or other property.
1.1.2 Symbols
The following symbols are used:
Read the operating instructions before use.
1.1.3 Illustrations
The illustrations in these operating instructions are intended to convey a basic understanding and may differ
from the actual version of the product:
The illustrations at the beginning of this documentation are numbered with these numbers; in the
text in these operating instructions these numbers refer to the applicable illustration.
Item reference numbers are used in the overview illustration. In the product overview section, the
numbers shown in the legend relate to these item reference numbers.
1.2 About this documentation
▶ It is essential that the operating instructions are read before initial operation.
▶ Always keep these operating instructions together with the device.
▶ Ensure that the operating instructions are with the device when it is given to other persons.
Changes and errors excepted.
1.3 Product information
Hilti products are designed for professional use and may be operated, serviced and maintained only by
trained, authorized personnel. This personnel must be informed of any particular hazards that may be
encountered. The product and its ancillary equipment may present hazards when used incorrectly by
untrained personnel or when used not as directed.
▶ Make a note of the designation and serial number printed on the identification plate in the following table.
▶ Always quote this information when you contact a Hilti representative or Hilti Service regarding questions
about the product:
Product information
Type:
Generation:
Serial number:
2 Safety
2.1 Safety instructions
In addition to the safety rules listed in the individual sections of these operating instructions, the
following rules must be strictly observed at all times.
2.1.1 Intended use
▶ To reduce the risk of injury, use only genuine Hilti accessories and ancillary equipment.
10
02