Hilti AI S1/4 Mode D'emploi Original page 18

the eyes, rinse the eyes with plenty of water and consult a doctor. Liquid leaking from the battery
may cause irritation or burns.
▶ Do not disassemble, crush or incinerate batteries and do not subject them to temperatures over
75°C (167°F). This presents a risk of fire, explosion or injury through contact with caustic substances.
▶ Do not expose batteries to high temperatures and keep them away from fire. There is a risk of
explosion.
▶ Use only batteries of the type approved for use with the applicable device. Use of other batteries or
use of the batteries for purposes for which they are not intended presents a risk of fire and explosion.
▶ Never use or attempt to charge damaged batteries (e.g. batteries with cracks, broken parts, bent or
pushed-in / pulled-out contacts).
▶ Paper clips, coins, keys, nails, screws and other small metal objects that could short-circuit the
electrical contacts must be kept away from batteries that are not in use and away from battery
chargers. Short-circuiting the contacts on a battery or charger may cause burning injuries or start a fire.
Requirements to be met by users
▶ Stay alert, watch what you are doing and use common sense when operating the device. Do not
use the device while you are tired or under the influence of drugs, alcohol or medication. A moment
of inattention while operating the device may result in serious personal injury.
▶ Make sure that the grip unit is securely engaged.
▶ Observe all warnings and instructions displayed by the scanner.
Transport
▶ Observe the special guidelines applicable to the transport, storage and use of Li-ion batteries.
3 Description
3.1 Overview of the product
RFID reader unit
@
Bar code scanner module
;
Camera
=
"On/off/standby" button
%
Multifunction button "left"
&
"Scan" trigger
(
Grip unit with scanner trigger
)
3.2 Overview of the screen unit
Scanner battery status LED
@
Mobile networks LED
;
LED for Wi-Fi
=
Touchscreen
%
"Menu" button
&
3.3 Intended use
The product described is a scanner. It is designed to be used for the identification and management of
various assets (e.g. tools and equipment) which are marked with a bar code or RFID tag.
3.4 Software functions
The scanner uses the Android operating system. Operation is basically in accordance with the familiar
Android standards implemented on conventional mobile phones.
The functions of the device are made available to users in the form of apps. You are strongly advised not
to install apps on the scanner which have not been certified by Hilti. Such apps are not supported by Hilti
Customer Service and will be removed from the device when maintenance or a repair is carried out.
The scanner is intended for use with the Hilti ON!Track system solution. In order to be able to use the
corresponding app, a user name and password are required. For more detailed information about Hilti
ON!Track, please contact your local Hilti sales organization or visit http://ontrack.hilti.com.
12
1
2
Battery compartment cover retaining screw
+
Grip unit battery compartment cover
§
Headphone socket
/
Multifunction button "right"
:
USB socket for the charging cable
∙
Grip unit release button
$
"Reset" button
(
"Scan" button
)
"Home" button
+
"Back" button
§
"Search" button
/