Ickle Bubba Moon Mode D'emploi page 5

Assembly - Installing the Rear Wheels
1. Insert the axle through each
rear wheel, with the axle going
through the break cluster on
the wheel first.
3. Once the wheels are fixed
onto the axle, place the axle
onto the frame of the chassis.
Push it upwards until you hear a
'click' on both sides
2. Fix the smallest locking cap
at the end of the axle to lock
the wheel on, then repeat with
the hub cap. Repeat this for
both wheels, ensuring both
sides are securely locked in
place.
4. To remove the rear wheel
axle, push both the metal push
pin clips inward, and slide
downwards until the axle is
clear of the chassis.
V.01.21
05