Replacing The Filters - Oreck AirInstinct AIR108 Guide D'utilisation

Replacing the Filters

IMPORTANT: Always remove the protective plastic
packaging from the filter before installing the filter.
1. Unplug the air purifier.
2. Open the Cover by gently pulling from the top corners.
3. Pull the pre-filter straight out of the cabinet.Thoroughly
4. Remove the used A3
5. Remove the plastic bags from the filters.
6. Place the filters back in the Cabinet in the following
1
4
12
rinse the Pre-Filter and let it air dry before placing it back
in the Cabinet. Do not use heated or compressed air as
part of the drying process.
Note: Do not dispose of the A3
frame.
order: HEPA filter, A3
Note: The A3 Odor Filter needs to be placed into
TM
its plastic frame before inserting into the unit.
5
Odor Filter and HEPA filter.
TM
Odor Filter's plastic
TM
Odor Filter, and Pre-Filter.
TM
2
3
6