Cleaning The Air Sensor - Oreck AirInstinct AIR108 Guide D'utilisation

Cleaning the Air Sensor

Cleaning the unit while it is plugged in may
result in electric shock, electric spark and
serious injury. Unplug the unit before cleaning
or maintenance.
1. Open the air sensor cover on the side of the product.
2. Clean the air inlet, outlet vents, and air sensor.
3. Wet a cotton swab lightly and clean the lens, dust inlet,
and dust outlet. After cleaning, use a dry cotton swab to
remove any moisture.
1
Without regular cleaning the sensor will decline in performance.
Note:
14
WARNING!
!
3
2
Air outlets
Air inlets
Dust outlet
Dust outlet