Cleaning The Pre-Filter; Cleaning The Truman Cell - Oreck ProShield Guide D'utilisation

The
air purifier
will not run if the
Top Cover is not
closed securely.
7

Cleaning the Pre-Filter

5
2
1. Unplug the air purifier and lay it on its side with the hinged
cover on top.
2. Open the Top Cover by pressing the Cover Release button.
3. Pull the Pre-Filter straight up and out of the Cabinet.
4. Thoroughly rinse the Pre-Filter and let it air dry before
placing it back in the Cabinet. Do not use heated or com-
pressed air as part of the drying process.
5. Slide the Pre-Filter back into the unit.
6. Close the Top Cover securely.

Cleaning the Truman Cell

Note: The Truman Cell may require more frequent cleaning if
"arcing" occurs. Arcing is a sharp snapping sound that occurs
when large particles are collected in the Truman Cell
longed or continuous arcing occurs the Truman Cell
cleaned.
1. Unplug the air purifier and lay it on its side with the hinged
cover on top.
2. Open the Top Cover by pressing the Cover Release button.
3. Remove the Truman Cell
(located across the top), lifting it straight up and out.
4. Place in sink, bathtub or other location where cleaner can
cover every surface.
3
®
by pulling up on the handle
®
1
. If pro-
®
should be
®