Brüel & Kjaer Vibro ds822 Serie Manuel page 38

4 mm displacement sensor system series ds822 ATEX
EN
Instructions
4 Installation
4.1 Assembling the displacement sensor
4.1.1 Displacement sensor for front-side mounting
4.1.2 Displacement sensor for rear-side mounting
4.2 Assembling the driver (oscillator/demodulator)
4.2.1 Mounting on hat-rail
4.2.2 Screw mounting
4.3 Connect the components together
4.3.1 Connecting and disconnecting plug connections
4.3.2 Connection via extension cable
4.3.3 Direct connection
4.4 Setting up the measuring chain and the displacement sensor
4.4.1 Measurement set-up
4.5 Electrical connection
5 Explosion protection
5.1 Responsibility of the plant operator
6 Functional check
6.1 Quick check
6.2 Troubleshooting
7 Disassembly
7.1 Disconnecting the connecting plugs
7.2 Driver disassembly
7.2.1 Disassembling driver with assembly adapter on hat-rail
7.2.2 Disassembling driver with assembly adapter, screw-mounted
7.3 Replacing displacement sensor system components
Page 2 of 29
| Contents
12
14
14
14
15
15
16
16
17
17
17
18
18
19
21
22
23
23
24
25
25
25
25
25
25
© Brüel & Kjær Vibro C105070.001 /V04

Technical alterations reserved!