Power supply
AC adaptor
This unit
1
(Left side)
2
The unit is in the standby condition (the [Í]
indicator lights) when the AC power supply
cord is connected. The primary circuit is
always "live" as long as the AC adaptor is
connected to an electrical outlet.
∫ When the unit is not going to be
used for a long time
The unit consumes 0.9 W when in standby
mode.
To conserve power, disconnect the AC power
supply cord from the AC outlet.
10
DC IN 9V
% DC IN 9 V
3
Household AC outlet
(AC 120 V, 60 Hz)
Battery pack
(included and optional)
(Lithium ion battery pack)
≥The illustrations show connection for the in-
cluded rechargeable battery pack (CGR-H603).
Connect the optional rechargeable battery pack
(CGR-H601) in the same way.
≥Charge the battery packs before using them for
the first time.
∫ To attach
This unit (Bottom)
2
Slide the pack so it clicks and locks into
place.
∫ To recharge
(When the unit is off)
∫
Connect to the household AC outlet while the
battery pack is attached (see left).
Recharging
Recharging is complete when [CHG] goes
out. ([Í] lights.)
Disconnect the AC power supply cord and
AC adaptor.
∫ To detach
1
Slide and hold the latch in position.
Battery pack
1
[Í] goes out
[CHG] lights
2