Publicité
Les langues disponibles
Les langues disponibles
8474488
Twin Tank Wheelbarrow Portable Air Compressor
5. Check tension of bolts, belts and hardware on a regular basis.
Operation of any equipment with loose bolts and/or fittings
will lead to excessive vibration and the premature failure
of the compressor system control components. Adjust belt
tension to allow 3/8 to 1/2 in. deflection with normal
thumb pressure.
6. Maintain rubber vibration pads. Excessive vibration is a major
cause of premature compressor failure. Always maintain the
rubber vibration pads located beneath tank assembly.
7. Drain moisture from air tanks daily. Water is a natural
byproduct of compressed air. Drain air tanks after each use
to combat internal tank corrosion. Keep drain valves open if
storing compressor for any length of time.
8. Do not alter factory RPM settings on gas-powered
compressors. Engine throttle arm is factory set and
locked into position at RPMs that will provide maximum
performance, fuel consumption and service life.
WARNING! Your safety and the well-being of others while
operating the compressor is our main concern. Do not operate
or permit anyone else to operate your air compressor until the
information contained in this manual is read and completely
understood. Please contact the Princess Auto customer service
department if you have any questions on the proper use of your
air compressor.
GAS POWERED
Refer to item numbers 10, 14, 15 & 16 in the System Controls section
of this manual for information on:
•
engine automatic idle control
•
engine kill switch
•
engine choke
•
fuel shut-off valve
Also note the engine throttle arm is locked into a top RPM setting
that will provide maximum service life and does not need to be
moved to start or stop the machine.
Visit www.princessauto.com for more information
V 3.03
15
Publicité
