Stanley MasterFix XGrip N08QI Mode D'emploi page 4

1. General
1.1 This manual
This manual describes the daily use of the tools. Carefully read this manual. Every user must be acquainted with
the contents of this manual. Strictly follow the instructions in this manual. Always carry out the activities in the cor-
rect order. Keep this manual at a fi xed place. If the manual gets lost, you can download it from www.masterfi x.com.
1.2 Icons in this manual
The following icons and symbols have been used in this manual:
CAUTION!
Procedures requiring extra attention
Read the manual
Use safely goggles
Use hearing protection
Use safety gloves
1.3 Discarding and the environment
Discarded tools are to be disposed of in accordance with the local regulations.
2. Main components
2.1 Components
A Mandrel
B Anvil
C Nose piece holder
D Protective sleeve
E Bracket
F Release button
G Trigger
H Tool - Air connection
I Pressure releave valve
J Pressure adjustment dial
2.2 Mandrels/Anvils
The delivered box for XGrip N08 QI contains mandrels and anvils M4 - M8.
The delivered box for XGrip N10 QI contains mandrels and anvils M5-M10
Other mandrels and anvils are available seperately.
XGrip N08QI - XGrip N10QI
2
K Needle valve (to set return time)
L Pressure gauge
M Oil level indicator
N Pressured air hose
O Air connection
P Mandrel/Anvil set
X Type indication
Y Serial number