Publicité
Les langues disponibles
Les langues disponibles
Regulations:
• Machine compliant with European directives.
• The certificate of compliance is available on our website.
• EAC Conformity marking (Eurasian Economic Community)
Waste management:
• This product should be disposed of at an appropriate recycling
facility. Do not throw away in a domestic bin.
GENERAL DESCRIPTION
The GYSFLASH 1.12 is ideal to charge most small lead-acid batteries, often used for cars and many other small vehicles such as
motorbikes, scooters, watercrafts... These batteries can be of many types eg: GEL (gel electrolyte), AGM (absorbed glass mat),
WET, MF (Maintenance Free), CA (Calcium)...
This charger has been designed to charge 12V batteries (6*2V elements) from 1 Ah to 32 Ah, or for floating charge up to 100 Ah.
START UP
1. Connect the charger to the battery using the proper accessory (clamps, lugs, etc...).
2. Plug the charger to the mains (single phase 220-240Vac 50-60Hz).
3. During the charge, the device indicates the charge's progress. When the indicator
vehicle. Once the indicator
4. After charging, disconnect the charger from the mains, then disconnect the charger's connections from the battery.
CHARGE MODE
• Charge mode description :
CHARGE mode (14.5V/1A) :
Mode designed for lead-acid batteries, 12V from 1 Ah to 32Ah and up to 100 Ah for a floating charge. 7 step automa-
tic maintenance cycle.
• Charging curve :
The GYSFLASH 1.12 use an 7 step charging curve which guarantees optimal performance for your battery.
1
U
I
Analysis
< 1s
CHARGE
OK
6
GYSFLASH 1.12
stays on, the battery is completely charged.
2
3
4
Recovery
Test
Desulfation
Max 5h
< 1s
Max 12h
blinks, the battery is ready to start the
5
6
Charge
Absorption
Max 25h
Max 8h
EN
7
Floating
no limit
Publicité
