Setting The Temperature Unit - VOLTCRAFT IR 1201-50D Notice D'emploi

Deleting data
Select the desired memory slot with "F1" or "F3".
To delete, select the menu point "Del" with "F2".
Delete an individual slot by selecting the "Yes" function with "F1".
Delete the entire memory by selecting the "All" function with "F2".
Exit the deletion menu with the "Esc" function or the "MODE" button.

Setting the temperature unit

Set the temperature unit for display with the "Unit" function.
Turn the measuring device on by briefly pressing the measuring button (5).
Within the preset power-off time, enter the "Unit/Mem/E" setting mode with the "MODE" button.
Press "F1" to access the settings menu "Unit".
Select the unit you wish to display the measured values in.
°C = degrees Celsius
°F = degrees Fahrenheit
Press "MODE" to return to the settings menu.
The change affects all measured values. The stored data are also displayed in the selected unit and
switched in the event of a new setting.
42