Introduction; Usage For The Intended Purpose - VOLTCRAFT 306 Mode D'emploi

Introduction

GB
Dear Customer,
by purchasing the digital thermometer 306, you now have a state-of-art temperature
meter.
The device has been designed according to DIN VDE 0411, part 1 for measuring
equipment = EN 61010-1.
Moreover, it is EMC-tested (for indoor use) and thus meets the requirements of the
applicable European and national Directives. Conformity has been proved; the
appropriate documents (declaration) are kept at the manufacturer's.
To make sure this state is maintained and to ensure safe operation, it is essential that
you - the user - adhere to these operating instructions!
For a fast response of your technical enquiries please contact or consult our
Technical Advisory Service:
Germany: Tel.
Fax
E-mail:
Mon to Thurs 8.00am to 4.30pm
Fri

Usage for the intended purpose:

Measurement of temperatures in the range from -200°C to +1370°C or -328°F to
+2498°F via one or two (independent) external temperature sensor(s) (K type).
Measurement of temperatures in the range from -50°C to max. +200°C or -58°F to
+392°F using the enclosed K-Type temperature sensors.
Bidirectional signal transmission to an IBM compatible PC running under Windows
'98 or a more recent version via the serial interface, with data logging function.
Measurement under adverse ambient conditions is not admissible
Such adverse ambient conditions are:
- moisture or excessive (air) humidity,
- dust and combustible gases, vapours or solvents,
- Thunderstorms or thundery conditions, such as strong electromagnetic fields,
etc.
20
+ 49 9604 / 40 88 80
+ 49 9604 / 40 88 48
tkb@conrad.de
8.00am to 2.00pm