Introduction; Product Description; Scope Of Delivery; Proper Use - Scheppach GP1000 Jet LCD Traduction Des Instructions D'origine

1. Introduction

Manufacturer:
scheppach
Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear customer
We hope your new product brings you much enjoyment
and success.
Note:
In accordance with the applicable product liability laws,
the manufacturer of this product assumes no liability
for damage to the product or caused by the product
arising from:
• Improper handling,
• Failure to comply with the operating instructions
• Repairs carried out by third parties, unauthorised
specialists.
• Installing and replacing non-original spare parts
• Application other than specified
• Failure of the electrical system in the event of the
electrical regulations and VDE provisions 0100, DIN
13 / VDE0113 not being observed
Please consider:
Read through the complete text in the operating manu-
al before installing and commissioning the device.
This operating manual should help you to familiarise
yourself with your product and to use it for its intended
purpose.
The operating manual includes important instruc-
tions for the safe, proper and economic operation of
the product, for avoiding danger, for minimising repair
costs and downtimes and for increasing the reliability
and extending the service life of the product.
In addition to the safety instructions in this operating
manual, you must also observe the regulations appli-
cable to the operation of the product in your country.
Keep the operating manual package with the power
tool at all times and store it in a plastic cover to pro-
tect it from dirt and moisture. They must be read and
carefully observed by all operating personnel before
starting the work.
The product may only be used by personnel who have
been trained to use it and who have been instructed
with respect to the associated hazards.
The required minimum age must be observed.
In addition to the safety instructions in this operating
manual and the separate regulations of your country,
the generally recognised technical rules relating to the
operation of such machines must also be observed.
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.
2. Product description (fig. 1)
1. Pressure connection
2. Transport handle
3. LCD display
4. MODE button
5. SET button
6. CHECK button
7. Bracket for screws
8. Ventilation screw
9. Water drain plug
10. Suction connection
11. Screw-on pre-filter cap
12. Pre-filter
13. Hose connection piece (for 1 inch hose)

3. Scope of delivery

- Automatic domestic water pump
- Hose connection piece
- Operating manual

4. Proper use

The machine may only be used in the intended manner.
Any use beyond this is improper. The user/operator, not
the manufacturer, is responsible for damages or inju-
ries of any type resulting from this.
An element of the intended use is also the observance
of the safety instructions, as well as the assembly in-
structions and operating information in the operating
manual. Persons who operate and maintain the ma-
chine must be familiar with it and must be informed
about potential dangers.
In addition, the applicable accident prevention regula-
tions must be strictly observed. Other general occupa-
tional health and safety-related rules and regulations
must be observed. The liability of the manufacturer and
resulting damages are excluded in the event of modifi-
cations of the machine.
www.scheppach.com GB | 21