Introduction - Scheppach SWP800-2 Traduction Des Instructions D'origine

1. Introduction

Manufacturer:
scheppach
Fabrikation von Holzbearbeitungsmaschi-
nen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer,
We hope your new tool brings you much
enjoyment and success.
Note:
According to the applicable product liabil-
ity laws, the manufacturer of the device
does not assume liability for damages to
the product or damages caused by the
product that occurs due to:
• Improper handling,
• Non-compliance of the operating in-
structions,
• Repairs by third parties, not by author-
ized service technicians,
• Installation
non-original spare parts,
• Application other than specified,
• A breakdown of the electrical system
that occurs due to the non-compliance
of the electric regulations and VDE reg-
ulations 0100, DIN 57113 / VDE0113.
We recommend:
Read through the complete text in the op-
erating instructions before installing and
commissioning the device.
The operating instructions are intended to
help the user to become familiar with the
machine and take advantage of its appli-
cation possibilities in accordance with the
recommendations.
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
and replacement
The operating instructions contain im-
portant information on how to operate
the machine safely, professionally and
economically, how to avoid danger, cost-
ly repairs, reduce downtimes and how to
increase reliability and service life of the
machine.
In addition to the safety regulations in
the operating instructions, you have to
meet the applicable regulations that apply
for the operation of the machine in your
country. Keep the operating instructions
package with the machine at all times and
store it in a plastic cover to protect it from
dirt and moisture.
Read the instruction manual each time
before operating the machine and careful-
ly follow its information. The machine can
only be operated by persons who were
instructed concerning the operation of
the machine and who are informed about
the associated dangers. The minimum
age requirement must be complied with.
In addition to the safety instructions in
of this operating manual and the separate
regulations of your country, the generally
recognised technical rules for operating
woodworking machines must also be ob-
served.
We accept no liability for accidents or
damage that occur due to a failure to ob-
serve this manual and the safety instruc-
tions.
GB | 21