Würth H 28-MA Traduction Des Instructions De Service D'origine page 13

OBJ_BUCH-0000000202-001.book Page 13 Monday, April 13, 2015 10:25 AM
Rotary Hammer
Article number
Voltage of replaceable battery
No-load speed
Impact rate
Impact energy per stroke according to EPTA-Procedure
05/2009
Drilling diameter, max.
– Concrete
– Steel
– Wood
– Brickwork (with core bit)
Spindle collar diameter
Weight according to EPTA-Procedure 01/2003
Battery
Article number
Rated voltage
Rated capacity
Number of cells
Weight
Intended Use
The machine is intended for hammer drilling in stone, as
well as for drilling in wood, metal, and plastic.
For damage caused by usage other than intended, the
user is responsible.
Symbols
Read all safety warnings and all
instructions
Warning
Before any work on the machine,
remove the battery.
Wear safety glasses/goggles.
Tool Specifications
0–1350 min
0–5000 min
LI-Ion
0700 956 730
28 V
3.0 Ah
1 x 7
1.0 kg
A battery that is new or has not been used for a longer
period does not develop its full capacity until after
approx. 2 – 3 charging/discharging cycles.
Do not place down the battery on radiators or expose
it to intense sunlight for longer periods; temperatures
above 50 °C cause damage.
Keep the contacts/terminals of the charger and
replaceable battery clean. For optimal service life, fully
charge the battery after use.
For maximum service life of the battery, remove it from
the charger after charging.
When storing the battery for more than 30 days:
Store battery dry and at approx. 27 °C.
Store battery at approx. 30% – 50% of its charging
capacity.
Recharge battery every 6 months.
H 28-MA H 28-MAS
5700 800 X 5700 801 X
28 V
-1
0–1350 min
-1
0–5000 min
4.7 J
28 mm
13 mm
30 mm
75 mm
54 mm
4.7 kg
LI-2-28 V LI-2-28 V
0700 957 730 0700 957 731
28 V
3.0 Ah
2 x 7
1.0 kg
CE mark
EAC mark
Battery
28 V
-1
-1
4.7 J
28 mm
13 mm
30 mm
75 mm
54 mm
4.7 kg
28 V
5.0 Ah
2 x 7
1.0 kg
13