General Safety Warnings; Safety Warnings - MECNOSUD MX12B Mode D'emploi Et D'entretien

1.6

GENERAL SAFETY WARNINGS

The machine, whilst conforming with safety requirements according to electrical, mechanical
and sanitary laws, can constitute a danger:
•
lf used for purposes and in conditions different from the ones foreseen by the
manufacturer.
•
Due to tampering of its protections and safety devices
Failure to comply with the instructions for the installation, operation, usage and maintenance
INFORMATION
All installation and maintenance operations must be carried out by qualified personnel who are
authorised by the manufacturer. The manufacturer declines any responsibility arising from
erroneous installation or tampering
1.7

SAFETY WARNINGS

INFORMATION
Read these instructions carefully before using the machine.
ATTENTION
In order to prevent dangerous conditions and/or possible injuries caused by electrical currents, mechanical parts, fire
or of a sanitary nature, the following safety warnings must be observed:
A)
Keep the place of worktidy. Untidiness can contribute to danger or accidents
B)
Evaluate environmental conditions. Do not operate the machine in a damp,
wet or insufficiently lit environment or in the vicinity of flammable liquids or gasses.
C)
Keep children and unauthorised personnel away. Do not allow them to come near to the machine or the place of work
D)
Operatethemachinewithinitspowerratingforitspermittedusage.Itwilloperate betterandin a safer fashion
ifnotoverloaded.
E)
Dressin a suitable manner.Donotwearloose fitting clothesordanglingaccessories that could get
caught in the moving parts. Use anti-slip footwear. For sanitary as well as safety reasons, cover long
hair with a suitable netandweargloves.
F)
Protect the powercable.Donottugthe cableto disconnectthesupplyplug. Do not expose the cable to
elevated temperatures, sharp corners, water or solvents
G)
Avoid unstable positions. Find the most suitable position that always ensures equilibrium
H)
Always pay maximum attention. Observe your own work. Do not operate the machine when distracted
I)
Disconnect the power supply at the end of operation, before cleaning and maintenance operations, and before
moving the machine
J)
Extension leads mustnot be used in the open air
K)
Check that the machine is not damaged. Before operating the machine, carefully check he efficiency of the
safetydevices.Checkthatthemovingpartsarenotblocked, that there are no damaged components,that all of the parts are correctly
fitted,and that all conditions that could influence the regular operation of the machine are optimal
L)
The machine should be repaired by qualified personnel. The repair operations must be carried out
exclusively by qualified people using original replacement parts only
Failure to observe these precautions can constitute an element of danger for the operator.
6