Maintenance; Cleaning; Demolition Of The Machine; Post-Purchase Service - MECNOSUD MX12B Mode D'emploi Et D'entretien

5

MAINTENANCE

ATTENTION
Disconnect the plug from the electricity supply before carrying out any maintenance or
cleaninginterventions.In caseof the malfunctioning or breakdown of the machine, contact only
the assistance centres authorised by the manufacturer (see Chapter7).
5.1

CLEANING

Cleaning must be carried out at the end of each use in observance with hygiene regulations in
ordertolookafter thefunctioningofthemachine.Withtheaidofawoodenorplasticspatula, proceed with an
initial removal of dough residue and successively carry out an accurate cleaning of the bowl, spiral,
brack dough, and the movable protection. Carry out this cleaning with the aid of a soft sponge and hot
water, then dry with absorbent paper suitable for alimentary use, and subsequently go over the
surfaces mentioned above, and then all of the machine with a soft clean cloth impr egnated with a
disinfectant specific for alimentary machines
ATTENTION
It is recommended to not, in any case, use any non-food grade, abrasive or corrosive chemicals. Avoid, in
any which way possible, the use of water sprays, utensils or rough or abrasive devices such as steel
scourers or sponges etc. which might damage the surfaces and in particular compromise safety from an
hygiene point of view. To maintain both the performance efficiency and the safety of the machine, it is
essential to carry out the programmed periodic maintenance (at least once every 6 months) of the following
particulars.
6

DEMOLITION OF THE MACHINE

In the case of the dismantling and demolition of the machine, the components that comprise it do not
present a degree of danger such that they require the adoption of particular precautions. To facilitate
the recycling of the materials, all the parts that make up the electrical system must be separated from
the machine.
7

POST-PURCHASE SERVICE

7.1

REPLACEMENT PARTS

To request replacement parts, refer to chapt.8 regarding the drawings and list of its components.
ATTENTION
We recommend to you use original repacement parts only.
The European Union States:
Deal exclusively with your sales point.
11