Publicité
Les langues disponibles
Les langues disponibles
x Changing the "Picture" setting
The "Picture" menu allows you to adjust the picture settings.
1
Press MENU.
2
Make sure the "Picture" icon (
selected, then press
3
Press V or v to select the desired item (e.g., "DRC-MF"), then press
Select
"DRC-MF"
"Picture Mode"
"3D Intelligent Picture"
* You can adjust the setting to your personal preference in the "Picture Adjustment"
option only when the "Personal" mode is selected (see page 22).
Notes
• "3D Intelligent Picture" is not available for HD and progressive input signals.
• For NTSC 3.58 color system, "3D Comb Filter : On" or "3D–NR : On" display will appear
when "3D Intelligent Picture" changes from one mode to the other. For PAL color system,
Digital Comb Filter and 3D-NR are also available.
) is
.
To
choose either "DRC1250", "DRC100" or "Progressive"
(see page 13).
choose either "Dynamic", "Standard", "Hi-Fine" or "Personal"*
(see page 12).
optimize picture quality.
Automatically, the picture will become clearer and sharper if the
signal is good and noise will be reduced if the signal is noisy.
Press V or v to select "On", then press
To cancel, select "Off", then press
Picture
DRC-MF:
DRC1250
Picture Mode:
Dynamic
Picture Adjustment
3D Intelligent Picture:
Select
Confirm
.
.
.
continue
Menu Adjustment
On
End
21
Publicité
