Publicité
Les langues disponibles
Les langues disponibles
x
Enjoying the WEGA Theatre Mode
with center speaker
The WEGA Theatre Mode enables you to enjoy the best picture, sound and
surround effect of a cinema from a DVD source. You can use your TV speaker as
the center speaker of your audio system for optimum vocal enhancement and
control its sound volume from the remote of the TV.
Setting up WEGA Theatre Mode
1. Connect the center speaker terminals of the amplifier to the center speaker
input terminal on the TV (see page 33).
2. Select the proper video input from "WEGA Theatre Setup" menu and turn on
(main power) the connected equipment (see page 29).
3. Set up the remote to work with the connected equipment (see page 18).
CENTER SP
WEGA THEATRE
2 +/–
Notes
• Be sure to place your TV and connected equipment adjacent to each other so that you can
control both the TV and the connected equipment by using the TV's remote control at the
same time (see page 18).
• The WEGA Theatre and center speaker modes are automatically cancelled when you change
the program number, video input or turn the TV off and on again.
• When the TV is in the center speaker mode, you cannot use the Twin pictures feature,
change the surround sound and the "Intelligent Volume" mode.
• Some equipment might not respond properly when WEGA THEATRE button is pressed. In
this case, use the equipment's own remote control.
14
Advanced Operations
To
VIDEO
switch to WEGA
HD/DVD
Theatre Mode
CENTER
WEGA
DRC-MF
SP
THEATRE
A/B
MENU
PROG
INDEX
1
2
3
4
6
5
7
8
9
switch to center
0
speaker mode
OPTION RESET
adjust center
TV
speaker volume
Press
WEGA THEATRE.
Be sure to aim the remote control
at the TV set and connected
equipment for about one second
after the button is pressed.
The connected equipment turns on
automatically from standby mode
and will start playing.
The "Picture Mode" and "Sound
Mode" will switch automatically
to "Personal" and you can adjust
the setting to your personal
preference (see pages 22 and 24).
CENTER SP repeatedly until
"CENTER IN Speaker" appears.
To return to normal speaker
mode, press the button repeatedly
until "MAIN Speaker" appears.
2 +/–.
Publicité
