Type of phone line
Dedicated fax line (receiving
only fax calls)
One line with two separate
numbers and ring pattern
service
Shared line (receiving both fax
and voice calls) with only an
attached phone
Shared line (receiving both fax
and voice calls) with an attached
answering machine or computer
voicemail
ENXC
Recommended rings-to-answer table
Use the following table to determine the number of rings-to-answer to
use.
Recommended rings-to-answer
France: leave at three rings.
The Netherlands: leave at two rings
Belgium: leave at two rings or set to three rings.
France: leave at three rings.
Belgium and the Netherlands: leave at two rings.
(If you have an answering machine or computer
voicemail for the other phone number, make sure the
product is set to a lesser number of rings than the
answering system. Also, see
patterns" on page
Set to five rings.
Two rings more than the answering machine or
computer voicemail. (You cannot set the product to
more than seven rings in France and the Netherlands,
or to more than five rings in Belgium.)
To set the number of rings-to-answer
To set or change the number of rings-to-answer, use the following steps:
1
On the control panel, press menu/enter.
2
Using the < and > buttons, select Fax Setup, and press
menu/enter.
3
Using the < and > buttons, select Fax Recv. Setup, and press
menu/enter.
4
Using the < and > buttons, select Rings To Answer, and press
menu/enter.
5
Using the alphanumeric keypad, enter the number of
rings-to-answer, and press menu/enter.
"Enabling answer ring
14.)
Setting rings-to-answer 13