Publicité
Les langues disponibles
Les langues disponibles
b) Lenses
Lens magnification and corresponding focal lengths are: 1.0x (500 mm), 1.5x (333
mm), 2.0x (250 mm), 2.5x (200 mm), 3.5x (144 mm). The focal range decreases as
the lens magnification increases.
• When attaching and removing lenses, hold them with a soft lint free cloth
to avoid fingerprints and prevent scratching.
• Make sure lenses are securely fastened to the lens bracket before letting
go.
• Store any unused lenses in the included lens case.
• Do not use force to swivel the lenses as this may damage the lens or
attachment points.
• Correct focal range depends on individual eyesight and whether
eyeglasses are being worn.
Two sets of lenses (6) can be attached at the same time so you can flip
between them, or use together to increase magnification.
• Select desired lenses (6) then gently push into the lens bracket (5) until it locks
into place.
The curved side of the lens should be facing
away from your eyes when wearing.
• To remove the lenses, carefully pull away from the middle of the lenses.
c) Adjusting the Headband
• Rotate the headband adjust screw (7) anticlockwise to loosen, and clockwise to
tighten.
Tighten the visor lock screws (8) if they become loose causing the visor (9)
to drop.
d) LED Light (Detachable)
Do not use force to over adjust the lighting angle, this may cause damage.
The LED light may leave marks or scratches on sensitive surfaces.
• Use the LED ON/OFF button (2) to activate/deactivate the LED light (3).
• You can wear it attached to your visor or detach it and place in another location.
• To detach the LED light (3), push the LED release button (1) marked PUSH and
slide the LED light out.
Care and Cleaning
• Turn LED light OFF before cleaning. Do not use any aggressive cleaning agents,
rubbing alcohol or other chemical solutions as they can cause damage to the
housing and malfunctioning.
• Use a lens cleaning cloth for cleaning the lens. Alternatively, use a dry, clean, soft
and lint-free cloth or a dust brush. If necessary, you can moisten the cloth with a
little lukewarm water.
• When cleaning the lens with a cleaning agent, make sure not to directly apply the
cleaner on the lens. Always apply the cleaning agent directly to the cloth first.
• When cleaning, do not apply too much force on the lens or housing in order to
avoid damage.
Disposal
a) Product
Electronic devices are recyclable waste and must not be disposed of in the
household waste. At the end of its service life, dispose of the product in
accordance with applicable regulatory guidelines.
Remove any inserted batteries and dispose of them separately from the
product.
b) Batteries
You as the end user are required by law (Battery Ordinance) to return all
used batteries. Disposing of them in the household waste is prohibited.
Contaminated batteries are labeled with this symbol to indicate that
disposal in the domestic waste is forbidden. The designations for the heavy
metals involved are: Cd = Cadmium, Hg = Mercury, Pb = Lead batteries,
e.g. below the trash icon on the left).
Used batteries can be returned to collection points in your municipality, our stores or
wherever batteries are sold.
You thus fulfill your statutory obligations and contribute to the protection of the
environment.
Technical Data
Power supply .......................... 3 x 1.5 V AAA battery (not included)
Battery life ............................... Approx. 6 - 8 hours
Illuminant ................................ 2 x LED
Color temperature ................... 6400 K (cool white)
Lens material .......................... Acrylic
Lens magnification .................. 1.0 x, 1.5 x,2.0 x,2.5 x 3.5 x
Lens focal lengths ................... 500 mm, 333 mm, 250 mm, 200 mm, 144 mm
Operating conditions ............... -10 to +40 °C, 10 – 90 % relative humidity
Storage conditions .................. -20 to +50 °C, 10 – 60 % relative humidity
Dimensions (L x W x H) .......... 290 x 200 x 60 mm
Weight .................................... 210 g (without lenses)
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights
including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represents the technical status at the time of printing.
Copyright 2018 by Conrad Electronic SE.
*1712602_v1_0718_02_dh_m_4L_(1)
Publicité
