Enerwatt EWV-FAT-FLEX-BK Manuel De L'utilisateur page 22

7. TROUBLESHOOTING
NO.
PROBLEMS
Failed speed change or max.
1
velocity too low
Motor doesn't work after turning
2
on power supply
3 Short range
4 The charger doesn't work
5 No power assistance
Warranty
1-year manufacturer's warranty on the frame and electrical components.
The following parts and conditions are not covered under warranty:
Wear and tear, tires, lights, decreased battery capacity, water/flood damage, gears, brakes, paintwork, misuse or accidents,
modifications, repairs and failure to service your e-bike by a qualified e-bike mechanic every 6 months.
|
Distribué par Distributed by:
TCED INTL. Inc.
700, chemin du Grand Bernier Nord
Saint-Jean-sur-Richelieu
(Québec) J2W 2H1
FABRIQUÉ EN CHINE - MADE IN CHINA
CAUSES
1. Low battery voltage
2. Throttle failure
3. Controller failure
1. Throttle failure
2. Lock failure or poor electric contact
1. Low tire pressure
2. Inadequate charging or charger failure
3. The battery is damaged or useful life has expired
4. Frequent braking start up, overloading
1. Charger wiring is loose or damaged
2. The battery weld line falls off or is damaged
1. Sensor damage
2. PAS cable damage
MODEL: EWV-FAT-FLEX-BK
SOLUTIONS
1. Fully charge the battery
2. Replace throttle or controller
1. Replace throttle or controller
2. Re-weld contact parts
1. Pump up the tire
2. Charge the battery or replace a charger
3. Replace the battery
1. Weld the connect line or replace
the charger
2. Weld the connect line or replace
the battery
1. Replace the sensor plate
2. Replace the cable
Phone/Téléphone: 450 348-8720
Toll free/Sans frais: 1 800-661-3330
USER'S MANUAL
20