Enerwatt EWV-FAT-FLEX-BK Manuel De L'utilisateur page 18

MODEL: EWV-FAT-FLEX-BK
USER'S MANUAL
4. OPERATION AND ADJUSTMENT
(CONTINUED)
4.3.1 Installation and charging of battery
Common sense tips for charging and use:
The battery should be charged in a well-ventilated environment, away from high temperatures, high humidity and fire. As the
battery and the charger are electronic products, high temperature or humidity will corrode their electronic components, resulting in
harmful gases or smoke, or even explosion. To avoid shortening the life span of the battery, do not discharge the battery completely
before charging. Once the battery is fully charged, the power supply should be unplugged as soon as possible, and the battery should
be disconnected from the charger. The battery should be kept at 50% charge, especially if the bike is stored for a long period of time.
Be sure to charge battery every month or so.
4.4 Reflector and lighting system
The reflector system includes a reflector on the front and rear of the bike. The lighting system comprises the front and rear lamp,
which is battery-powered. These lights provide better visibility at night so that pedestrians and vehicles can see you. Please abide by
local laws and standards for use of reflectors and lights.
4.5 Folding method diagram
• Unscrew the safety grip of the folding head tube, open the tube's folding handle, and then fold down tube's upper end.
• Unscrew the seat tube's quick release, insert the seat tube down the bottom, locking the seat tube's quick release.
• Open the safety switch of middle tube, pull the folding handle, open the folding handle tube, fold the front wheel
and rear wheel as needed.
• Unscrew the front end of frame to 180 degrees, fold the front wheel and rear wheel to parallel and then complete the e-bike folding.
4.6 Safety height line
4.6.1 Safety height line of the post
The post can be properly adjusted depending on personal riding preference, but the safety line must not be exposed; improper use
can result in serious injury.
Adjustment method:
1. Loosen the screw in the middle of the post.
2. Move the post to the comfortable height, ensuring the safety line is not visible.
3. Re-tighten the screw.
16