Enerwatt EWV-FAT-FLEX-BK Manuel De L'utilisateur page 15

2. BASIC STRUCTURE AND NAME
2.1 Basic structure
1. LCD display
2. Thumb throttle
3. Handle bar
4. Turn light
5. Grips
6. Brake
7. Folding riser
8. Folding device
9. Front basket
10. Front light
11. Mudguard
12. Front fork
3. ASSEMBLY METHOD AND REQUIREMENTS
3.1 Installing the front fender
Insert the front fender between the front fork and tire, insert the white plastic screw between the plate and front fork hole, and insert
the long screw through the plate via the white plastic screw end at the front fork hole. Finally, tighten the nut.
3.2 Installing the front wheel
1. Adjust the nut
2. Adjust front wheel
3. Insert the centre axle
4. Tighten the nut with a wrench
5. Finish installation
When fastening the nut for the front wheel hub, press down the front fork appropriately so that the front wheel
hub can work closely with the front fork.
13. Tire
14. Inner tire
15. Rim
16. Spokes
17. Disc brake device
18. Disc brake plate
19. Hub holder
20. Frame
21. Folding device
22. Saddle
23. Suspension tube
24. Rear light
MODEL: EWV-FAT-FLEX-BK
25. Reflector
26. Battery
27. Controller
28. PAS sensor
29. Crank
30. Pedal
31. Rear rack
32. Motor
33. Free wheel
34. Stand
USER'S MANUAL
13