Enerwatt EWV-FAT-FLEX-BK Manuel De L'utilisateur page 13

USER MANUAL
CONTENTS
1. SAFETY INSTRUCTIONS AND NOTES
1.1 Safety instructions
1.2 Notes
2. BASIC STRUCTURE AND NAME
2.1 Basic structure
3. ASSEMBLY METHOD AND REQUIREMENTS
3.1 Installing the front fender
3.2 Installing the front wheel
3.3 Mounting the rotor to the hub
3.3.1 Mounting the adapter and caliper
3.4 Installation torque for all parts
4. OPERATION AND ADJUSTMENT
4.1 PAS system
4.2 Operating the display
4.3 Charging the battery
4.3.1 Installing and charging the battery
4.4 Reflector and lighting system
4.5 Folding method diagram
4.6 Safety height line
4.6.1 Safety height line of the seat post
4.6.2 Saddle position
4.7 Braking system
4.8 Speed control system
4.8.1 Adjusting the chain
4.9 Damping system
5. USE AND MAINTENANCE
5.1 Routine inspection before use
5.2 Display use, inspection and maintenance
5.3 Maintenance
6. RIDING INSTRUCTIONS
7. TROUBLESHOOTING
This electric-powered bicycle is equipped with pedals and an auxiliary electric motor.
It cannot be run exclusively by means of the auxiliary electric motor, except in start-up assistance mode.
Start-up assistance speed is less than 6 km/h.
An electric bicycle is similar to a regular bicycle, except that it has a motor, controller, charger and battery.
Electric power makes riding easier and limits effort.
When you open the box, please check that the following items are inside.
If any items are missing, please contact a customer service agent.
Electric bicycle 1 pc
Charger 1 pc
Pedals 1 pair
Manual 1 pc
MODEL: EWV-FAT-FLEX-BK
USER'S MANUAL
11