Cognex In-Sight 2000 Serie Mode D'emploi page 7

Cable shielding can be degraded or cables can be damaged or wear out
l
more quickly if a service loop or bend radius is tighter than 10X the cable
diameter. The bend radius must begin at least six inches from the
connector.
This device is certified for office use only and if used at home, there can be
l
frequency interference problems.
This device should be used in accordance with the instructions in this
l
manual.
Applicable national and local wiring standards and rules must be followed.
l
All specifications are for reference purpose only and may be changed
l
without notice.
6