Cognex In-Sight 2000 Serie Mode D'emploi page 2

Regulations/Conformity
Note: For the most up-to-date CE declaration and regulatory conformity
information, please refer to the Cognex online support site:
http://www.cognex.com/Support.
Manufacturer Cognex Corporation
One Vision Drive
Natick, MA 01760 USA
In-Sight 2000 Series Vision Sensor: Regulatory Model R00039
European
In-Sight 2000 Mini Series Vision Sensor: Regulatory Model 1ABD
Compliance
CAUTION:
radio interference in which case the user may be required to take adequate measures.
The CE mark on the product indicates that the system has been tested to and conforms with the
provisions noted within the 2014/30/EU Electromagnetic Compatibility Directive and the
2011/65/EU RoHS Directive. Cognex Corporation shall not be liable for use of our product with
equipment (i.e., power supplies, personal computers, etc.) that is not CE marked.
FCC FCC Part 15, Class A
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference; and (2) this device must accept any
interference received, including interference that may cause undesired operation. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communications. Operation of
this equipment in a residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at their own expense.
KCC R-REM-CGX-R00039
MSIP-REM-CGX-DM260
MSIP-REM-CGX-IS2000
Canadian
This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la
EMC
classe A est conforme à la norme NMB-003 du Canada.
Compliance
Safety and Regulatory
This is a Class A product. In a domestic environment this product may cause
1