Before commencing the installation or operation of this product, read these instructions carefully and
completely, noting in particular the instructions regarding safety (below).
This ladder should never be used as a free standing leaning ladder.
Do not attempt to climb your loft ladder until installation is complete. Use a second ladder to gain
access to the loft while carrying out the work. Ensure that this is stable and suitable for the task.
During installation and operation, follow all instructions step by step to ensure your safety and
optimum performance of the loft ladder.
When installation is complete, before using the ladder make sure that it is pulled fully down to the
appropriate top stops, that both feet are resting firmly on the floor and that the locking catches are
properly engaged. Observe the instructions for the optimum safe working angle.
Observe normal safety precautions when working in the loft space. Place weight only on the main
ceiling joists. Do not drill above head height. Avoid contact with electrical wiring. Ensure someone else
is on the premises and knows where you are in case of an accident.
Do not modify any component supplied with this product or substitute any loft ladder component with
anything other than genuine replacement parts.
E
nsure that the ladder is not obstructed by items stowed in the loft.
Do not exceed maximum load of 150kg.
Stepladder • Bradawl • Saw • Drill plus 13mm & 2mm bit • Large flat bladed screwdriver
Crosshead Screwdriver: small and medium • Adjustable spanner/pliers
Lever to prise off any support battens • Tape measure/Ruler • Hammer
3 Section Professional Loft Ladder
B
Minimum Hatch Opening (Width)
Maximum Height
C
Minimum Height
D*
Minimum Stowing Height Required In Loft
E**
Minimum Length Required Behind Hatch
Stowed Requirements
*
D
B
F
A
* At handrail low position - 710mm (28")
At handrail top position - 965mm (38")
Safety Instructions
Tools required:
mm
Inches
381
15
3000
118
2133
84
710
28
1120
44
E**
** At handrail low position - 1120mm (44")
At handrail top position - 1370mm (54")
F (Floor Thickness)
A (Minimum Hatch Opening Length)
mm
Inches
mm
76
3
400
412
102
4
127
5
425
438
153
6
450
178
7
463
203
8
Deployed Requirements
Inches
15.75
16.25
16.75
17.25
17.75
18.25
C
68°- 80°
03