Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Installation manual e-MatriX heat 800/500 RD,ST (LL)
Remote is not working.
Large amount of smoke ap-
pears grey or colourless.
57
e-MatriX will not operate,
the LED's continuously to
blink three times.
58
e-MatriX will not operate,
the LED's continuously to
blink once every eight sec-
onds.
33 <
<
<
<
Low batteries.
Remote isn't paired to receiver.
Distance to fire is too far.
Lamp failure.
Water leak
Water level too high.
Place new batteries, see chapter 5 in user
manual.
Pair the remote control with the receiver,
see chapter 5 in the user manual.
Shortens the distance.
Replace circuit board with lamps.
Press the mains switch of the Control box to
the "OFF" (0) position, see fig. 4.0-D. Check
all connections on water leakage and
the mains switch back in the "ON" (I) posi-
tion.
Press the mains switch of the Control box to
the "OFF" (0) position, see fig. 4.0-D and call
for maintenance.
turn
Publicité
Table des Matières
