Diamond DRP-16 Mode D'emploi page 3

GB
GUIDE ROLLERS
INSTRUCTIONS FOR: INSTALLATION, USE AND CARE
The guide roller is born to transport the racks to the entry and to the exit of the dishwasher.
Each other use will be consider improper and for this reason potentially dangerous.
INSTALLATION
Take off the package.
Throw in the rights containers parts in wood with screws and plastics packages.
Assemble the couples of legs with the proper screws. (See photo 1)
Approach the guide roller to the machine or to the other roller and interpose the profiling
gasket.
Adjust the feet to the suitable height. (See photo 2)
Superimpose the covering profil of the joint. (See photo 3)
Fix the roller with proper screws in stainless steel. (See photo 4)
Assemble the rollers to allow the pivot to be practicable.
Should the roller be the terminal part of the system, please connect the micro switch to the
holdfast of the machine. (See photo 5)
Test the system.
CARE
Wash with water the roller at the end of his usage.
To disassemble the rollers press on the inferior side of the pivot, and lift.
2