Taurus V302MT Mode D'emploi page 21

To prevent any damage to the surface of the hob, use a suitable scraper to immediately remove
any remains of kitchen foil, food, splashed fat, sugar stains and other sugary foods. Then use a
towel and a suitable product to clean the surface, rinse with water and dry with a clean cloth. Do
not use abrasive sponges or cloths and avoid using harsh chemical detergents.
TROUBLESHOOTING
Before calling customer services, make sure that the hob is connected correctly. The warranty
does not cover any of the following cases:
Damage caused by improper use or storage.
Damage caused by unauthorised dismantling and/or repair.
Damage caused by misuse.
Use of the hob for commercial purposes.
The following are the error codes that may appear on the hob in the event of a fault:
Error code
ER03 Water or cookware in the control area
When an "H" appears in pause or off mode,
H this means that the surface temperature of
the cooking area is too high.
E The temperature inside the hob is too high
E7 The glass on the hob is too hot
To avoid damage and risks, do not try to dismantle the hob yourself.
Possible cause What to do
Clean the control area
It will disappear automatically as soon
as the appliance cools down.
Contact the supplier
Switch the hob off and wait.