Taurus V302MT Mode D'emploi page 15

PRACTICAL TIPS:
Use the correct cooking utensil for the size of the hob.
Do not use excess water when cooking. The more water used, the more energy needed.
Whenever possible, use a pressure cooker, it saves time and energy.
Only switch the hobs on when the cookware is ready and turn the hobs off before removing the
cookware.
Cookware must be flat bottomed.
Use the right sized cookware for the quantity being cooked. Using large sized cookware for small
amounts increases energy consumption.
Cooking without using the lid on the cookware increases energy consumption.
USE AND CARE
Do not use the appliance if the ON/OFF switch does not work.
Switch the appliance off when not in use and before undertaking any cleaning task.
Store this appliance out of reach of children and/or those with reduced physical, sensorial or
mental abilities or who are unfamiliar with its use
Never leave the appliance switched on and unattended. Unsupervised cooking can be dangerous
and could cause a fire.
CAUTION: The appliance and its accessible parts become hot during use. Do not touch hot
components.
CAUTION: If the surface is cracked, disconnect the appliance from the mains power supply to
prevent the risk of electric shock. Call the technical support service.
CAUTION: Water condensation may appear on surfaces and objects around this appliance.
BEFORE INSTALLING:
Make sure that all the product's packaging material has been removed.
Make sure the worktop surface is level and square, and that no structural elements interfere with
the required space.
Make sure the worktop is made of heat resistant material.
If the hob is installed above an oven, the oven has to have a built-in fan.
The installation has to comply with all required space requirements and applicable standards and
regulations.
A suitable isolation switch must be incorporated into the permanent wiring to provide complete
disconnection from the main power source. This must be positioned and mounted in compliance
with local wiring rules and regulations.
The isolation switch must be easily accessible with the hob installed.
If in doubt about the installation, check with the local authorities and bylaws.
Use heat-resistant, easy-to-clean finishes on the wall surfaces that surround the hob.
To prevent accidents, contact a qualified technician if the power cable is damaged and needs to
be replaced.
Make sure that the electric cable is not bent or crushed.
INSTALLATION
The appliance must be installed by a professional. Do not install it yourself. The appliance must
be installed and connected in accordance with current regulations. After unpacking the appliance,
check for any visible signs of damage. If it has been damaged in transit, DO NOT USE IT, and
contact the shop where it was purchased.
Do not cover or obstruct any of the appliance's openings.
Do not install the appliance directly above a dishwasher, refrigerator, freezer, washing machine or
dryer.