Publicité
Les langues disponibles
Les langues disponibles
Use the appropriate to cut the worktop as per the sizes shown in the diagram. Use Silicone or PTFE to seal the
edges of the cut surface and allow it to dry before fitting the hob.
Run the protective strip around the underside of the hob, making sure that the ends overlap. Do not fit the hob
into position without applying the protective foam.
Do not use adhesives to stick the hob onto the worktop. Once the protective strip has been fixed to the
underside of the hob, place it into the hole made in the worktop. Carefully apply pressure to fit the hob into the
space, ensuring a good seal on the outer edge.
MAINS CONNECTION
This appliance must be connected to the domestic power circuit by a qualified person. Before connecting the
hob to the electric supply, check that:
The home wiring can handle the power of the hob.
Publicité
