Setting The Return Flow Temperature; Return Flow Heat Regulation Mc Dn 25 (1") - meibes 20 Documentation Technique Pour Le Montage Et La Mise En Service

12.1.3 Adjusting the return temperature
The temperature range is 40°C - 70°C. The required temperature of the mixed circuit can be set at the top of the component's thermostat and
can be read from the thermometer in the return flow (blue).
Note: The temperature does not change immediately after the thermostatic head has been adjusted, i.e. the temperature can be read on the
regulated heating circuit after an appropriate runtime.
12.2 Return flow heat regulator DN 25 (1") (electronically controlled)
Technical data
DN:
Top/hot boiler connection: Upper/Hot boiler connection:
Lower/boiler connection: Bottom boiler connection:
Pump:
Axial separation:
Components of:
Dimensions:
Sealing materials:
Temperature display:
Usage range:
Operational pressure:
18
25
1 1/2" FI (flat-sealing)
1" FI
see ref. number
125 mm
Steel, Brass, EPP insulation
ca. H 500 x W 250 x D 255 mm
PTFE, asbestos-free fibre sealing, EPDM
0° up to 120°C
up to 110°C
PN 6
Pump
see Fig. 14.1
see item No.
Effiziente Energietechnik