Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Table of contents
1.
2.
3.
3.1
4.
5.
6.
7.
8.
9.
10.
(for connection to regulated heating circuits)
11.
11.1
Constant heat regulation set
(thermostatically controlled)
circuit temperature
(clip-on thermostat)
11.2
temperature control
12.
12.1
(thermostatically controlled)
12.2
(electronically controlled)
10
Safety guidelines
11
Safety guidelines
Please follow these safety guidelines carefully in order
11
to prevent danger or damage to persons or property.
Assembling, commissioning, inspection, maintenance
11
and repair must be carried out by a registered specia-
list company.
11
Before starting work make yourself familiar yourself with all com-
12
ponents and their functions. Follow the current accident prevention
directives, environmental directives and legal regulations for
12
assembly, installation and operation. Furthermore, make also sure
you know the relevant applicable DIN, EN, DVGW, VDI and VDE
12
standards as well as all current relevant country-specific standards,
13
laws and guidelines..
13
Operating the System:
Disconnect the system from the power supply and ensure that it is
13
safely isolated from the power supply (e.g. at the separate fuse or a
master switch).
Secure the system against being switched back on.
(In the case of fuel gas, close the gas isolating valve and secure
14
against accidental opening). Repair work on components with safety-
related functions are not permitted.
14
The place of installation must be dry and frost-free. Avoid danger due
14
to adjacent components. Provide for free access.
The components listed in the following instructions are intended for use
15
in heating systems in accordance with DIN EN 12828.
15
15
15
16
16
16
17
17
17
17
17
18
18
- Read the assembly instructions before
use
- Risk of being cut
- Risk of being crushed
- High temperature hazard
- Electric voltage hazard
- Risk of falling during installation
Effiziente Energietechnik
Publicité
Chapitres
Table des Matières
