Honda FJ500 Manuel De L'utilisateur page 32

3.Tilling depth adjustment
Install the hitch attachment in the hitch box with a hitch pin.
The tilling depth adjustment can be made as follows:
Remove the lock pin and pin, loosen the lock nuts and bolts securing
the drag bars A and B, and slide the drag bars up or down as
necessary. After adjustment, tighten the bolts and lock nuts securely.
Insert the pin and set the lock pin.
HITCH PIN
HITCH BOX
DRAG BAR A
LOCK NUT
LOCK PIN
PIN
BOLT
LOCK NUT
BOLT
HITCH ATTACHMENT
DRAG BAR B
29