System Setup - Sherwood RD-6506 Mode D'emploi

RD-6506(A)_ENG_110408_RD-6506(A)_ENG 2011-04-11 오전 11:41 페이지 28

System Setup

1.
Turn the setup menu on.
• The setup menu will be shown.
• To turn the menu off, press this button again.
2.
Select the desired menu using the CURSOR
UP(▲)/ DOWN(▼) buttons.
SETUP ENTER / MEMO
MAIN MENU
28
TUNE
3.
Confirm your selection.
• When selecting "SYSTEM", see "SETTING THE
SYSTEM" on page 30.
• When selecting "INPUT", see "SETTING THE INPUT" on
page 32.
• When selecting "SPK SET", see "SETTING THE
SPEAKER SETUP" on page 33.
• When selecting "CH LEVEL", see "SETTING THE CH
LEVEL" on page 37.
• When selecting "PARAMTR", see "SETTING THE
PARAMETER" on page 39.
• When selecting "HDMI", see "SETTING THE HDMI" on
page 41.
• When selecting "EXIT", the setup menu will be turned off.
PRESET