Operation - Bartscher 1KA10 Mode D'emploi

Connection
DANGER! Electric shock hazard!
The device can cause injuries due to improper installation!
Before installation and connecting the local power grid
specification should be compared with that of the device (see
rating plate). Connect the device only in case of compliance!
Connect the device only to properly installed single socket
with protective terminal.
•
The electrical circuit in the socket must be secured to at least 16A. Only connect the
device directly to the wall socket; do not use any extension cords or power strips.

5.2 Operation

•
Before use, clean the device according to the instructions set out in point 6
"Cleaning".
•
Before use, for device code-no. A120466, make sure the drain taps are closed as
show in the photo below.
The drain taps are equipped with the drain safety lock that prevents them from
unintentional opening. When the tap is closed the safety lock should be located
before the drain tap lever.
Drain tap lever
NOTE!
For the device code-no. A120466, the containers may be controlled separately
by the control elements.
•
Insert the grate at the bottom of the container and place the desired number of
sausages on it.
•
Pour in the desired amount of water. Take into account the "MIN" and "MAX"
marks in the container.
- 28 -
Drain safety lock
Drain pipe