Olimpia splendid DOLCECLIMA Instructions Pour L'installation, L'emploi Et L'entretien page 72

On the remote control: - press the key "TIMER Of" to access the function and then press the key
-
b. Once the set time has passed, the appliance switches off.
c. Time can be set with 30 minutes steps up to 10 hours and with 60 minutes steps from 10 to 24 hours.
d. Switching off the appliance or adjusting the timer setting to "0.0h" will cancel the programmed switching
off function.
3.12 OThER FUNCTIONS
3.12.a SILENT function
• This function can only be activated when the appliance is in AUTO function and can be activated
from the control panel of the appliance.
a. When the appliance is working, press key SW8 (speaker); The speaker symbol appears.
Ventilation speed automatically sets itself to minimum.
b. Press the key again to deactivate the function.
3.12.b SLEEP function
• This function can be activated only from the remote control.
• This function is not available while the Dehumidiication (DRY) and Fan Only (FAN) modes are
active.
a. When the appliance is running, press the key "SLEEP" on the remote control.
The icon appears on the control panel and on the remote control display. .
The appliance will decrease (when cooling) or increase (when heating) the set temperature by 1°C (1 or
2 F) for 30 minutes.
b. Then, the appliance will decrease (when cooling) or increase (when heating) the set temperature by 1°C
(1 or 2 F) for an additional 30 minutes.
c. This temperature will be maintained for 7 hours before returning to the originally selected temperature.
Once this time has passed, the appliance will restart working as originally programmed.
d. Press the key "SLEEP" on the remote control to stop the function; the icon on the control panel and on
the remote control display turn off.
EN - 28
"TIMER Of" once or more until the switching off delay time is set.
- Direct the remote control towards the appliance; a beep conirms the acti-
vation of the function.
on the control panel and the indicator "Timer Of" on the remote
- The icon
control display light up.