Skytec ST140 Manuel D'instructions page 6

Connection with AC-3 or DTS power amplifier
 Connect the video terminal with the video input terminal of TV set (Video, S-Video or
YfCbfCr terminal)
 Connect the digital output terminal of this machine (optical or coaxial interface) with the
AC-3 or dts decoder via the optical or coaxial.
 Press the "Enter" key on the remote control to enter, then press the "set up" to exit the
function menu, and finish the sel.
 Press the Setup key on the remote control to enter (Function menu) .
 Press the Enter key on the remote control to confirm, then press the setup key to exit the
function menu, thus the selling is completed.
 Press the cursor
the cursor key on the remote control to select the digital output then Press the '-'Enter"
key to the next menu.
 Press the cursor
SPDIF/PCM output mode.
 Press the "Enter" key on the remote control to enter, then press the "set up' to exit the
function menu, and finish the set.
key on the remote control to select the Audio Setting, then press
key on the remote control to select the SPDIF/code resource or