Publicité
Les langues disponibles
Les langues disponibles
S40 series - ANTIPANIC BAR application on MOBILE DOORS
S40 series - ANTIPANIC BAR application on MOBILE DOORS
S40 series - ANTIPANIC BAR application on MOBILE DOORS
S40 series - ANTIPANIC BAR application on MOBILE DOORS
S40 series - ANTIPANIC BAR application on MOBILE DOORS
8
UNI5933
M12x25
PM208
E
F
E -
Screw the M12X25 coupling screw and retighten the hooking screw (if necessary). Insert the
PM339A upper section on the PM208 upper joint and screw on the socket head screws provided.
Correctly align to the section before screwing.
F -
Insert the two P4116 hooking plates (to attach to carriages) to the PM339A upper section and
insert the closing spring latch to the PM228A lower section, temporarily placing it at 5-8 cm from
the edge.Prepare the P4117 contact caps, making a bridge over the lower one and connecting the
2x0.50 bipolar cable to the upper one (for connection to the "closed doors" control circuit). Close
the two sections with the two caps and thread the cable through the upper section until it reaches
the other end (next to the joint).
** In case of doors with irregular dimensions (see table on page 4), insert the P4117 sliding wheel as
indicated on page 18.
4
PM339A
PM338A
SPRING LATCH, MOVE IT TOWARD THE
P4116
1
-
+
TO MODIFY THE ACTION OF THE
CENTRE OF THE SECTIONS
PM339A
P4117
3
2
SPRING
LATCH
- pg. 25 -
Publicité
