Astralpool Viron P320 eVo Instructions D'installation Et De Fonctionnement page 15

Remove 2 phillips head screens from rear of pump and the data port cover is removed by hand. Plug RJ12 6
wire flat cable purchased from AstralPool into rear of pump and reassemble. To achieve a proper seal, press
the flat cable under the guide tabs (detailed view A). Slide data port cover back on by aligning the tabs with the
slots and the flat cable with the recess (detailedl view B).
REMOTE CONTROL OF SPEEDS AND TIMER FUNCTIONS

Viron eVo pump stand alone

4 built in timer periods in pump

3 programmable speed settings

Low, medium or high speed can be selected in each timer period

Priming period can be selected from 2 to 120 minutes

Prime RPM can be selected from 1275 to 2850 RPM
Installation and General Maintenance Manual – Viron eVo Pool Pump
240v power
24v comms data
15