Mitsubishi Electric PAR-21MAA Livret D'instructions page 7

Note:
Your new entries at Steps 2 and 3 will be cancelled if you press the Mode (Return) button
2 before pressing the Filter button 4.
5. Press the Mode (Return) button 2 to complete the setting procedure. This will return
the display to the standard control screen, where 1 will now show the newly set day
and time.
5 Using the Remote Controller
(1) How to Start, Stop, Change the Mode, and Adjust the Temperature
2
3
3
2 MENU
BACK MONITOR/SET
PAR-21MAA
<To Start Operation>
I Press the ON/OFF button 1.
• The ON lamp 1 and the display area
come on.
Note:
G When the unit is restarted, initial settings
are as follows.
Remote Controller settings
Mode
Last operation mode
Temperature
Last set temperature
setting
Fan speed Last set fan speed
COOL or DRY
Airflow up/
Mode HEAT
down
FAN
– 7 –
6
4
5
˚C
˚C
8
TEMP. ON/OFF
7
ON/OFF
FILTER
1
DAY CHECK TEST
CLOCK OPERATION
CLEAR
1
5
6
7 8
<To Stop Operation>
I Press the ON/OFF button 1 again.
• The ON lamp 1 and the display
area go dark.
Horiz.
outlet
Last
setting
Horiz.
outlet