Publicité
Les langues disponibles
Les langues disponibles
To set the clock display
You can set the clock to be shown on the display
when the unit is turned on.
When shipped from the factory, the clock is set to
be shown on the display.
• CLOCK ON: Clock display is turned on.
• CLOCK OFF: Clock display is turned off.
To select the level meter
You can select the level display according to your
preference.
When shipped from the factory, this mode is set
to "EQ ONLY."
• EQ ONLY:
Equalizer pattern is displayed.
• LEVEL+EQ: Equalizer pattern is displayed
along with audio level meter.
• LEVEL ONLY: Audio Level meter illuminates
upward and downward from
center.
To select the dimmer mode
When you turn on the car head lights, the display
automatically dims (Auto Dimmer).
When shipped from the factory, Auto Dimmer
mode is activated.
• AUTO: Activates Auto Dimmer.
• OFF:
Cancels Auto Dimmer.
• ON:
Always dims the display.
Note:
Auto Dimmer equipped for this unit may not work
correctly on some vehicles, particularly on those
having a control dial for dimming.
In this case, set the dimmer mode to "ON" or "OFF."
To select the telephone muting
This mode is used when a cellular phone system
is connected. Depending on the phone system
used, select either "MUTING 1" or "MUTING 2,"
whichever mutes the sounds from this unit. When
shipped from the factory, this mode is
deactivated.
• MUTING 1:
Select this if this setting can
mute the sounds.
• MUTING 2:
Select this if this setting can
mute the sounds.
• MUTING OFF: Cancels the telephone muting.
32
– CLOCK DISP
– LEVEL/EQ
– DIMMER
– TELEPHONE
To turn on/off the key-touch tone
You can deactivate the key-touch tone if you do
not want it to beep each time you press a button.
When shipped from the factory, the key-touch
tone is activated.
• BEEP ON: Activates the key-touch tone.
• BEEP OFF: Deactivates the key-touch tone.
To turn on/off the power amplifier switch
– P. AMP SW
You can switch off the built-in amplifier and send
the audio signals only to the external amplifier(s)
to get clear sounds and to prevent internal heat
buildup inside this unit.
When shipped from the factory, the power
amplifier switch is turned on so that the built-in
amplifier works.
• P. AMP ON:
Select this mode when not using
external amplifier(s).
• P. AMP OFF: Select this mode when using
external amplifier(s).
To adjust the display contrast level
– CONTRAST
You can adjust the display contrast level among 1
(dark) to 10 (bright). When shipped from the
factory, the display contrast level is set at level 5.
To select the scroll mode
You can select the scroll mode for the disc
information if it consists of more than 10
characters.
When shipped from the factory, Auto Scroll mode
is set to "ONCE."
• ONCE:
Scrolls only once.
• AUTO:
Repeats the scroll (5-second
intervals in between).
• OFF:
Cancels Auto Scroll.
Note:
Even if the scroll mode is set to "OFF," you can scroll
the display by pressing D (display) for more than 1
second.
– BEEP SW
– SCROLL
Publicité
